Use and Care Manual

- 11 -
INTENDED USE
The machine must only be used for its intended purpose! Any other use is
deemed to be a case of misuse.
To use the machine properly you must also observe and follow all safety
regulations, the assembly instructions, operating and maintenance
instructions lay down in this manual.
All people who use and service the machine have to be acquainted with
this manual and must be informed about the machine's potential hazards.
It is also imperative to observe the accident prevention regulations in force
in your area.
The same applies for the general rules of occupational health and safety.
The machine is used for: Turning wood.
Any manipulation of the machine or its parts is a misuse, in this case
its sales partners cannot be made liable for ANY direct or indirect
damage.
Even when the machine is used as prescribed it is still impossible to
eliminate certain residual risk factors.
W A R N I N G
 Use the machine never with defective or without mounted guard!
 The removal or modification of the safety components may
result in damage to equipment and serious injury!
HIGHEST RISK OF INJURY!