Use and Care Manual

3
(This step would use transparency film from this kit)
1. Use transparency film and inkjet printer to print out the image you want, make
sure the image is in black to achieve a better opaque effect, it is better to use tape
to overlap the 2-3 same films together.
2. Print on the non-smooth side of the film, if you print on the glossy uncoated side,
the ink will not dry because it is not absorbed by the coating.
STEP 2: Applying Photo Emulsion to the Screen
(This step would use screen printing frame and screen printing squeegee from
this kit)
1. Do this step in a dark room since the photo emulsion reacts to light, spread a
small amount of the photo emulsion on one side of the screen bottom.
2. Use the scoop coater or squeegee to spread a thin layer of the emulsion across
the screen(both side), until the whole screen are covered with emulsion.
Place your finished screen in a cool dark place for a few hours or overnight to let it
dry.