Use and Care Manual

4
STEP 3: Preparing the Screen for Exposure
(This step would use screen printing frame and transparency film from this kit)
1. When your screen is dry, take your screen out of its cool dark place(but still in a
dim area).
2. Place the screen on black fabric or other black things, it can help reduce
reflection. Turn the screen with the emulsion "back" up.
3. Place your image onto the screen IN REVERSE.
4. Place a clean piece of glass over the image to hold it tight against the screen.
STEP 4: Exposing the Screen
(This step would use screen printing frame and transparency film from this kit)
Turn your UV exposure unit on. The time of expose your image will depend mostly
on your light source. There is an example for reference: 10 x 14 inch screen with
150W bulb and 12 inches height needs 10 minutes exposure.
STEP 5: Washing the Screen
(This step would use screen printing frame from this kit)
1. Use a sprayer or hose to spray water at the screen. After a few minutes the