Use and Care Manual

6
3.Put the positioning seat(4)on the square tube of the base(1),thread it from
top to bottom with the external hexagon screw M8X55,and lock the other
end with the external hexagon nut M8. Put the outer hexagon screw
M10X55(15) onto the outer hexagon nut M10(18)and thread the screw head
40 mm from the base square tube from top to bottom, then lock the outer
hexagon nut M10 (18)onto the base square tube in reverse.
Serial No
Name of accessories
Quantity
15
External hexagon screw M10X55
4
19
Outer hexagon nut M10
4
22
felt pad
4
Serial No
Tool name
Picture
I
Wrench 14-17