Support and E-Warranty Certificate https://www.vevor.com/support SCREEN PRINTING MACHINE NS404-S USER MANUAL We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and doses not necessarily mean to cover all categories of tools offered by us.
Screen printing machine NEED HELP? CONTACT US! Have product questions? Need technical support? Please feel free to contact us: CustomerService@vevor.com This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.
This symbol, placed before a safety comment, indicates a kind of precaution, warning, or danger. Ignoring this warning may lead to an accident. To reduce the risk of injury, fire, or electrocution, please always follow the recommendation shown below. WARNING：Read all safety warnings, instructions, illustrations and specifications provided with this machine. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.
machine periodically and, if damaged, have them repaired by an authorized technician. The handles must be kept clean, dry, and free from oil and grease at all times. 9. Stay alert. Watch what you are doing, use common sense. Do not operate any machine when you are tired. 10. Check for damaged parts. Before using any machine, any part that appears damaged should be carefully checked to determine that it will operate properly and perform its intended function.
1.Take out the base(1)and put it on the table, then take out the table support bar(3)and put it on the base(1),and lock the locking tool wrench 17-17(I)with square neck bolt square(16),gasket M10(17)and external hexagon nut M10(18).
2.Take out the long table support bar (25), put it on the base (1), and lock it with square neck bolt square (17), gasket M10 (18) and external hexagon nut M10 (19).
3.Put the positioning seat(4)on the square tube of the base(1),thread it from top to bottom with the external hexagon screw M8X55,and lock the other end with the external hexagon nut M8. Put the outer hexagon screw M10X55(15) onto the outer hexagon nut M10(18)and thread the screw head 40 mm from the base square tube from top to bottom, then lock the outer hexagon nut M10 (18)onto the base square tube in reverse.
4.
5.
6.
7.
8.
9.Lock the socket head cap screw(13)on the base disc(as shown in the figure),and stick the felt pad(21) to the head end of the socket head cap screw(13).
10.Take the wooden plate(7)and put it on the table with the hole facing up,then take the metal bracket(6)and put it on the wooden plate(7) and face the hole, then take the cross screwdriver(2)and put the cross countersunk head tapping screw M4X12(11)face the hole,and lock the metal bracket(6)on the wooden plate(7).
11.
List of accessories Serial Name Picture Qty Bag No 1 No pedestal 1 Serial Name Picture Qty No 11 Bag No Socket head cap 24 ② 24 ② 4 ② 24 ⑥ 4 ① 12 ① 12 ① 14 ⑤ 18 ⑤ 8 ④ screw M6X16 2 printing arm 4 12 3 table support 2 13 Externalhexagonal bar 4 positioning Flange nut M6 screw M8X30 4 14 seat Socket head cap screw M10X25 5 screen clamp 4 15 External hexagon screw M10X55 6 metal bracket 4 16 square neck bolt M10X20 7 wooden plate 4 17 square neck b
List of accessories Name Picture Toollist Qty Bag Serial No Serial Name Picture Qty Bag No No No 21 Tabletting I 8 Wrench 14-17 ④ 1 22 23 felt pad hook 8 II Cross ① Screw ② driver 8 III Open spanner ③ M10 24 Spring 8 IV Open M8 Long 1 spanner ③ 25 1 2 V Hexagon table socket support wrench bar M10 26 VI 1 1 Hexagon socket wrench M6 16 1
items Description 1 Name Screen printing machine 2 Model NS404-S 3 Product parameter 4 Package Size 5 G.W. Printing color：4，Working Position：4 710x630x275mm 37.
Warning-To reduce the risk of injury, user must read instructions manual carefully. HOUSEHOLD USE ONLY Manufacturer：Dongguan Ruiling Printing Equipment Co.,Ltd Address：Ruida Building, No 2 Lane 1, West of Xintang road, Huangcun Community, Humen Town, Dongguan City, China. EU Importer: WAITCHX, 250 bis boulevard Saint-Germain 75007 Paris.
Support and E-Warranty Certificate https://www.vevor.
