Instructions / Assembly

- 5 -
 Dress properly.Do not wear loose clothing or jewelry.Keep your
hair,clothing and gloves away from moving parts.Loose
clothes,jewelry or long hair can be caught in moving parts.
 Only use safety equipment that has been approved by an
appropriate standards agency. Unapproved safety equipment may not
provide adequate protection.Eye protection must be ANSI-approved and
breathing protection must be NIOSH-approved for the specific hazards in
the work area.
Tool use and care
 Use the correct tool for your application.The correct tool will do the
job better and safer at the rate for which it was designed.
 Do not use the tool if the switch does not turn it on and off. Any
tool that cannot be controlled with the switch is dangerous and must be
repaired.
 Disconnect the plug from the power source before making any
adjustments, or storing tools. Such preventive safety measures
reduce the risk of starting the tool accidentally.
 Store idle tools out of the reach of children and do not allow
persons unfamiliar with the tool or these instructions to operate
the tool.Tools are dangerous in the hands of untrained users.
 Maintain tools. Check for misalignment or binding of moving
parts,breakage of parts and any other condition that may affect
the tools operation. If damaged,have the tool repaired before use.
Many accidents are caused by poorly maintained tools.
Ventilator Safety Warnings
 Connect to GFCI outlet only.
 Keep children away from ventilator. Small fingers can be inserted
through grill.
 Do not use near flammable fumes or dust.Ventilator has internal arcing
parts that will ignite flammable fumes/dust.
 Do not use without guard in place.
 To reduce the risk of fire or electric shock, do not use this Ventilator