Instructions / Assembly

- 10 -
CARE AND MAINTENANCE
Cleaning:
CAUTION-Before cleaning the fan be sure to disconnect power cord from
the plug. Clean the grille surface with a clean damp cloth. Do not use harsh
chemical or abrasive cleaners. DO NOT IMMERSE THE FAN OR ANY
WIRES IN WATER.Replace front grille before fan use. Allow fan to dry
completely before use. Periodic grille cleaning with a vacuum will prevent
dust build up . The motor is sealed and does no require any interior
maintenance,cleaning or lubrication.
Maintenance:
The internal motor bearings are permanently lubricated at the factory and
do not require any additional
Repair:
DO NOT OPERATE THE FAN WITHOUT THE GRILLEIN PLACE. DO
NOT USE THE FAN IF IT HAS MALFUNCTIONED
OR BECOME DAMAGED IN ANY WAY.
Storage:
Keep original carton for storage of the fan. Coil and tie the power cord to
avoid damage during storage.
TROUBLE SHOOTING
Q: Excessive noise
A: 1.It is normal that there is noise during operation. If too loud, please set
the fan to lower speed.
2. Check if the blade is installed properly.
Q: Fan does not operate
A: 1.Make sure the fan is connected to a powered electrical outlet.
2. Clean the blade regularly.
Made In China