Technical Support and E-Warranty Certificate www.vevor.com/support AXIAL PORTABLE VENTILATION FAN We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
NEED HELP? CONTACT US! Have product questions? Need technical support? Please feel free to contact us: Technical Support and E-Warranty Certificate www.vevor.com/support This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received.
Warning-To reduce the risk of injury, user must read instructions manual carefully. FCC statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1)This device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation. CORRECT DISPOSAL This product is subject to the provision of European Directive 2012/19/EC.
sign of malfunction! Stop using, Check if Plug, cord or appliance is damaged. Excessive noise,unpleasant odor or abnormal heat. SAFETY PRECAUTIONS This appliance is not intended for use by people( including children)with reduced physical, sensory or mental capabilities, or lack of experience and knowledge,unless they have been given supervision or instruction concerning the use of the appliance by person responsible for their safety.
Electrical safety Tool plugs must match the outlet.Never modify the plug in any way.Do not use any adapter plugs with grounded tools.Unmodified plugs and matching outlets will reduce risk of electric shock. Avoid bod contact with grounded surfaces such as pipes,radiators,ranges and refrigerators.There is an increased risk of electric shock if your body is grounded. Do not expose tools to rain or wet conditions.Water entering a tool will increase the risk of electric shock.
Dress properly.Do not wear loose clothing or jewelry.Keep your hair,clothing and gloves away from moving parts.Loose clothes,jewelry or long hair can be caught in moving parts. Only use safety equipment that has been approved by an appropriate standards agency. Unapproved safety equipment may not provide adequate protection.Eye protection must be ANSI-approved and breathing protection must be NIOSH-approved for the specific hazards in the work area.
with any solid-state speed control device. Do not reposition the fan while in use. Unplug after use. Inspect before use; do not use if parts loose or damaged. Keep inlet and outlet clear during use. Do not allow paper,drapes or other types of loose material to be drawn into the inlet end of the unit. Stopping the free movement of air through the Ventilator will overheat the motor and cause fire. Maintain labels and nameplates on the tool. These carry important safety information.
WARNING TO PREVENT OPERATION: SERIOUS INJURY FROM ACCIDENTAL Turn the Power Switch of the tool off and unplug the tool from its electrical outlet before performing any procedure in this section. NOTE: For additional information regarding the parts listed in the following pages,refer to Parts List and Diagram. Work piece and Work Area Set Up Designate a work area that is clean and well-lit. The work area must not allow access by children or pets to prevent distraction and injury.
Connect the nylon rope side of the duct to the fan. Then tie the nylon rope tightly. (See the Fig.2.) Fig.2. General Operating Instructions WARNING Automatically Operated Device - To reduce the risk of injury disconnect from power supply before servicing. Ventilator may restart without warning after thermal shutoff. Turn the fan on by moving the switch either to the right, or the left. The positions are noted next to the switch.
MAIN COMPONENTS AND DIAGRAM NO Parts QTY NO Parts QTY 1 Fan grille 1 5 Switch 1 2 Fan blade 1 6 Handle 1 3 Motor 1 7 Fan grille 1 4 Metal base 1 8 Rubber Base 4 -9-
CARE AND MAINTENANCE Cleaning: CAUTION-Before cleaning the fan be sure to disconnect power cord from the plug. Clean the grille surface with a clean damp cloth. Do not use harsh chemical or abrasive cleaners. DO NOT IMMERSE THE FAN OR ANY WIRES IN WATER.Replace front grille before fan use. Allow fan to dry completely before use. Periodic grille cleaning with a vacuum will prevent dust build up . The motor is sealed and does no require any interior maintenance,cleaning or lubrication.
Technical Support and E-Warranty Certificate www.vevor.
