Instructions / Assembly

- 11 -
Valve Position
Function
FILTER
Normal Filtration and Vacuuming
BACKWASH
Cleaning Filter by reversing the flow
RINSE
Used after backwash to flush dirt from the valve
WASTE
By-passes filter, used for vacuuming to waste or lowering
the water level
RECIRCULATE
By-passes filter for circulating water to pool
CLOSED
Shuts off all flow to filter or pool
REPLACEMENT PARTS OF THE MULTIPORT VALVE
THIS FILTER OPERATES UNDER HIGH PRESSURE. WHEN ANY PART
OF THE CIRCULATING SYSTEM (e.g., CLAMP, PUMP, FILTER, VALVES,
ETC.) IS SERVICED, AIR CAN ENTER THE SYSTEM AND BECOME
PRESSURIZED. PRESSURIZED AIR CAN CAUSE THE LID OR VALVE TO
BE BLOWN OFF, WHICH CAN RESULT IN SEVERE INJURY, DEATH, OR
PROPERTY DAMAGE
TURN THE PUMP OFF BEFORE CHANGING THE VALVE POSITION.
TO PREVENT DAMAGE TO THE PUMP AND FOR PROPER OPERATION
OF THE SYSTEM, CLEAN THE PUMP STRAINER AND SKIMMER
BASKETS REGULARLY.
DO NOT UNSCREW THE SCREWS OFF LANGE CLAMP WHILE THE
PUMP IS RUNNING.