Technical Support and E-Warranty Certificate www.vevor.com/support SAND FILTER MODEL:25023BX/25033BX/25043BX/25053BX We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and doses not necessarily mean to cover all categories of tools offered by us.
SAND FILTER MODEL:25023BX/25033BX/25043BX/25053BX NEED HELP? CONTACT US! Have product questions? Need technical support? Please feel free to contact us: CustomerService@vevor.com This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received.
FUNCTION The filter uses special filter sand to remove dirt particles from pool water. The filter sand is loaded into the filer tank and functions as the permanent dirt-removing media. When the control valve is in the FILTER position, the pool water, which contains suspended dirt particles, is pumped through your piping system and is automatically directed by the patented filter control valve to the top of the filter tank.
a. Loosen the flange clamp and remove the filter control valve (if previously installed). b. Cap the internal pipe with a plastic cap to prevent sand from entering it. c. We recommend a filling tank approximately 1/2way with water to provide a cushion effect when the filter sand is poured in. This helps protect the under-drain laterals from excessive shock. d. Carefully pour in the correct amount and grade of filter sand. (Be sure the center pipe remains centered in the opening.
MAIN DIMENSION -4-
DIMENSION TABLE Model 25023BX Size 16" High A 820mm Diameter B 400mm Valve Port Sand Qmax 35kg 35GPM Accessories Size 11/2" 1.Cylinder end locking ring right 2.Cylinder end locking ring left 3.Two-end threaded joint 25033BX 19" 835mm 458mm 11/2" 45kg 45GPM 25043BX 22" 855mm 506mm 11/2" 85kg 55GPM 4.Single-end threaded joint 1PCS 1PCS 3PCS 1PCS 5.Transparent single-end T-thread 1PCS 6.Pressure gauge radial direction 7.Screw three-piece set 1PCS 2PCS 8.Teflon tape 1PCS 9.
INSTALL/START-UP OF FILTER 1.Be sure the correct amount of filter media sand is in the tank and that all connections have been made and are secure. 2.Depress the control valve handle and rotate to the BACKWASH position. (To prevent damage to the control valve seal, always depress the handle before turning.) 3.Prime and start the pump according to pump instructions (be sure all suction and return lines are open), allowing the filter tank to fill with water.
REPLACEMENT PARTS OF FILTER -7-
Item 1 2 3 4 5 6 7 8 9 Part number Description MPV-01A Valve FT-03W-04-1 Pressure gauge with o ring FT-03W-05 FT-01-003 Flange clamp MPV-01W-10-1 Screw with nut MPV-01W-10-2 FT-01-035 Ph350 FT-01-036 PH400 FT-01-037 PH450 Filter tank FT-01-038 PH500 FT-01-039 PH600 MPV-03W-03 Lateral assembly FT-01-017 with center pipe FT-01-022 PH350-PH400 FT-01-023 PH450-PH600 FT-01-008 PH350-PH400 Filter FT-01-007 PH450-PH600 base FT-01-010 Drain -8- Lateral
REPLACEMENT PARTS OF THE MULTIPORT VALVE Item Description Qty Part No 1 Handle 1 MPV-01-020 2 Pin handle 1 MPV-01W-1 3 Washer 1 MPV-01-006 4 Bolt with nut, lid 6 5 Lid assy 1 MPV-01-004 6 O'ring,lid 1 MPV-01W-03 7 Washer 1 MPV-01-007 8 Spring 1 MPV-01W-04 9 O'ring,rotor 2 MPV-01W-05 10 Rotor 1 MPV-01-005 11 Gasket,spider 1 MPV-01-015 12 Body-diffuser assy 1 MPV-01-001 13 O'ring,bulkhead 3 MPV-01W-06 14 Bulkhead fitting 3 MPV-03-004 15 O'ring,bulkhe
- 10 -
Valve Position Function FILTER Normal Filtration BACKWASH Cleaning Filter by reversing the flow RINSE Used after backwash to flush dirt from the valve WASTE By-passes filter, used for vacuuming to waste or lowering and Vacuuming the water level RECIRCULATE By-passes filter for circulating water to pool CLOSED Shuts off all flow to filter or pool REPLACEMENT PARTS OF THE MULTIPORT VALVE THIS FILTER OPERATES UNDER HIGH PRESSURE. WHEN ANY PART OF THE CIRCULATING SYSTEM (e.g.
Made In China - 12 -
- 13 -
Technical Support and E-Warranty Certificate www.vevor.
