Replacement Part List

VEVOR
D. Maintenance and Safe
Adjusted and tested before shipping, it SHOULD NOT be removed unless you
【 have special requirement or need to adjust the distance between upper and lower
blades after replacing the blades.
Dive your hand between upper and lower blades when operate the handle is
FORBIDDEN!
Trouble shooting
Trouble
Cause
Elimination methods
Unsmooth fillet
Blunt blade
Grind or replace the blade
Cut but
Too large gaps between
Adjust it untill fited
connected
upper and lower blades
Deckle edge left
Wrong Position of Cut
Adjust the positioning block until the cut
Material
material is tangent to the 90-degree straight
edge, then tighten the positioning block
Cut but Irregular
Displacement
Hold the material to prevent it