Use and Care Manual

- 5 -
3. OPERATION
When using the machine, it's indispensable to wear protective gloves and
safety glasses.
Feeding the strapping around the package
The strapping is fed around the package in the direction shown in the
illustration. The strapping end is held tightly with the left hand and pulled
firmly towards the operator with the right hand.
Loading the strapping
The rocker is raised with the right hand. The left hand inserts the two straps
lying precisely upon one another into the tool until they hit strap stops.
The lower strap end must slightly protrude from the end of the base plate.
Be certain that the strapping is held by the strap guide.
Tensioning the strapping
The tool is held tightly with the left hand being
placed on the sealing lever. The tensioning
handle is now moved forward and backward
with the right hand until the desired tension is
attained.