Technical Support and E-Warranty Certificate www.vevor.com/support Manual Strapping Tool MODEL: A333 We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
Manual Strapping Tool MODEL: A333 NEED HELP? CONTACT US! Have product questions? Need technical support? Please feel free to contact us: Technical Support and E-Warranty Certificate www.vevor.com/support This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received.
INSTRUCTIONS Thank you very much for choosing this Manual Strapping Tool - Please read all of the instructions before using it.The information will help you achieve the best possible results. The products carried in this catalog may be different in color than the actual item. 1. SAFETY INSTRUCTIONS Read these instructions carefully. Failure to follow these instructions can result in severe personal injury.
Protective gloves When handling strap, always wear protective gloves. Strap warnings Never use strap as a means of pulling or lifting loads. Failure to follow these warnings can result in severe personal injury.
side of the strap, away from the direction the loosened strap end will fly. Use only cutters designed for strap and never hammers, pliers, hacksaws, axes,etc. Fall hazard Keep your working area tidy. Untidiness of your working area may cause a risk of injury. Maintaining improper footing and / or balance when operating the tool can cause you to fall. Before tensioning, especially in elevated areas, always establish good balance.
3. OPERATION When using the machine, it's indispensable to wear protective gloves and safety glasses. Feeding the strapping around the package The strapping is fed around the package in the direction shown in the illustration. The strapping end is held tightly with the left hand and pulled firmly towards the operator with the right hand. Loading the strapping The rocker is raised with the right hand.
Sealing the strapping The sealing lever is moved forward using the left hand until it hits the stop. The lever is then moved back to its initial position. When sealing, the right hand absorbs the sealing force by holding the tensioning handle. Releasing the tool Hold the cut-off strap end with the left hand, lift the rocker with the right hand and push the tool from the applied strap to the right. 4. SEAL CONTROL Regular control of the seal is necessary.
must be taken away from the package.The tool must be readjusted immediately(see SEALADJUSTMENT). Incorrect seal (the sealing mechanism is adjusted too low) This stamped seal is too deep and the lower strap is scratched by the cutter.Although the tensile strength of this seal is sufficient the strapping must be taken away from the package because of the scratched lower strap.The tool must be readjusted immediately (see SEALADJUSTMENT). 5.
After every disassembly it is essential to retighten screws A57 and A58 with the recommended torque when reassembling.The use of a torque key is necessary. 6. CLEANING In case of heavy dirt and when painted straps are used the punch,dies,gripper and feed-wheel must be cleaned regularly.Normally it is sufficient to blow out the parts with the help of an air gun. 7. ACCESSORIES Using tool with horizontal handle Upon request the tool can be supplied with a bolt A84 and a grip ball A51.
Suspension It is possible to suspend the tool for strapping in vertical position.Order the suitable suspension separately under item no.A85. MAINTENANCE 1. Avoid prolonged exposure to the sun to avoid aging.
Address: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia Imported to USA: Sanven Technology Ltd.
Technical Support and E-Warranty Certificate www.vevor.
