Instructions / Assembly
- 9 -
MAINTENANCE
1. Inspect periodically all parts and accessories and replace them if
damaged.
2. Have damaged parts replaced by an authorized service center.
3.Please use a soft, clean cloth when cleaning the machine.Do not flush
the machine with water or liquid.
4.Please store the product in a dry and ventilated place.
TROUBLESHOOTING
Problem
Possible Cause
Possible Solution
The label didn't come out
The label roll is not
properly installed.
Reinstall the label roll.
The internal spring of the
handle is stuck.
Remove obstacles to
make the grab handle
work properly.
Labeling failure
The label extension
length is set too short.
Label extension length
readjust.