Ice Crusher Instruction manual Product pictures are subject to actual It is important that you read these instructions carefully and keep it for future reference.
Circuitdiagram IMPORTANT SAFETYINSTRUCTIONS When using electrical appliances, basic safety precautions should be followed to reduce the risk of fire, electric shock and injury to persons or property. Read all instructions before operating the machine for the first time. Install the machine correctly before using. 1. Keep the ice crusher and power cable away from heat sources and hot surfaces. 2. To avoid electrical shock, do not place the cord, plug or ice crusher in water or other liquids. 3.
Installation Cleaning and maintenance of ice crusher Install the ice crusher like as below: 1) Cleaning of internal and external parts Note: Unplug the power plug before performing any cleaning or maintenance procedures. Do not use alcohol to clean the ice crusher, as this may cause plastic parts to crack. a) exterior Use a clean, soft cloth to wipe the outside of the ice machine at least once a week, and then use a damp cloth moistened with a neutral detergent to remove grease or other impurities.
NOTE: Improper installation may cause injury to people or objects. Operation instruction 1. The socket must be grounded. 2. The fuse on the PCB must be >10A,if change,must be operated by a technician. 3. If the power cord need to change,must be operated by a technician. 4. Voltage fluctuation can’t be exceed ±10% than rated voltage,or a Voltage stabilizer is needed. Your ice crusher is used to crush small ice cubes.
