Instructions / Assembly

- 6 -
beyond repair. Please note that the manufacturer will not guarantee for
such negligent use of appliance.
If resetting this thermal cut-out does not switch the appliance back on,
please call for service or professional maintenance agent to have
further check.
This safety device may have been switched off during transport, if so
reset the thermal cut-off following the above instructions.
THERMAL CUT-OUT
The appliance is fitted with a thermal cut-out to have double safety
protection .When the wax is boiled dry and the boil dry protections fails
to work ,the thermal cut-out will work ,then the appliance stops working.
The cut out temperature is 240℃
This thermal cut-out is a disposable part. When this part comes into
effect, it will be broken and cannot be used again. The appliance
should be brought to authorized agent to replace the thermal cut-out.
CLEANING AND MAINTENANCE
A. Only perform cleaning once the plug has been removed and the
wax melter has completely cooled down.
B. Never immerse the wax melter into water.
C. Pore hot water into the melter, brush sides, Melt the wax completely
then pour out the water.
D. Do not use any cleaning products which can cause a health hazard.
E. Use a soft cloth to wipe the urn body dry. Do not use abrasive
materials to avoid scratches.