Instructions / Assembly

- 2 -
Warning-To reduce the risk of injury, user must read instructions
manual carefully.
HOUSEHOLD USE ONLY
This product is subject to the provision of European Directive
2012/19/EC. The symbol showing a wheelie bin crossed through
indicates that the product requires separate refuse collection in the
European Union. This applies to the product and all accessories
marked with this symbol. Products marked as such may not be
discarded with normal domestic waste, but must be taken to a
collection point for recycling electrical and electronic devices
INTRODUCTION
Electric wax melter are manufactured in durable stainless steel and
dull polished to give a long lasting finish. With proper care and
management your new purchase will give you years of trouble free
service .
IMPORTANT SAFETY RULES
1. Read all instructions carefully. Responsibility for failure cannot
be acceptable if any of these instructions are ignored.
2. Always unplug the melter plug Before Cleaning, After Use and
Before emptying.
3. Before using the Wax melter, check whether the voltage indicated
corresponds with the electric outlet (EU Plug 230V/US Plug 120V).
4. Make sure the unit is connected to an earthed socket.
5. Do not use the Wax melter if the cord or plug is damaged, it should
be replaced before using.
6. Always switch off before removing plug from the outlet.
7. Always switch off before trying to move the wax melter.
8. Remove the plug by grasping the plug. Do NOT pull the cord.
9. Do not let cord hang over edge of counter.
10.Place the wax melter securely in center of counter or work space.