Use and Care Manual
5
**********************************************************
And follow these steps to operate the machine!
1. Install all parts of the machine
2. Connect power. Make sure that the power requirements of the
machine do match the power source as specified on the data plate.
3. Pull oil into fryer tank.
!Notice the mark in the oil tank, 25L oil is recommended.
DO NOT have it over 26 L nor lower 10L.
!
Danger of fire exists if the oil’s level is below the minimum
indicated level.
!
Mind the heat oil and don’t get a burn.
4. Dial S7, machine is on power.
5. Adjust fried time according to your need, referenced switches T. Dial
S5 to “ON” condition, machine start to convey.
6. Rotate S3 to the desired temperature, but do not exceed 220 ℃ .The
two indicator lights near it will light under the heating situation.
7. Put the pre-mix dough into Funnel.
8. Then hold S1 to test whether there is dough shape and dropping from