Use and Care Manual

3
!
It is recommended within180 ℃ ,180 ℃ is the best donut fry
temperature. When Temperature is over 200 ℃ ,to protect the
equipment,the power of the machine will be cut aromatically.When
machine is below 200℃,you can restart it by press RESET switch in the
back.
S4: Control number of donut(one or two) dropping from Funnel at a time.
The switch only works while the S6 works normally.
S5: It is a the conveying switch .
S7: Power switch,which supply the electric to the whole machine.
It is in the back of the machine which is near the Fuse.
T : You can adjust fried time according to your need.
RESET：It is in the same plate with the FUSE. When the heating
temperature is over 200℃,machine’s power is cut. And then you screw
to open it and press it to restart the machine.
* You can try to change the weight of dropping dough by adjusting
the following: