Use and Care Manual

heating tube will stop working. Thermostat indicator is off at the same time. When
oil's temperature degree decreases, thermostat can connect power automatically and
thermostat indicator start working again. This will circulate to ensure temperature
is within the temperature range you set.
E. Pull the pre-dought into container.
F. Press switch Drop to have dought from container.Dought will be fried in oil tank.
G.Press switch Flip to turn over the dought.
(2) Have machine work automatically.
A. Press On/Off switch,it lights up and the machine starts to run.
B. Set heating temperature vie switch TEMP Set+(or TEMP Set-).
C. Set your desired frying time vie switch Time+ (Time-).
180℃ ~220℃ is recommended for heating temperature.
！Pre-heat oil before you fry donut.
D. Press switch Heat,heating is beginning and its indicator lights up. When temperature
is to your desired value, thermostat will be off by itself and heating tube will stop
working. Thermostat indicator is off at the same time. When oil's temperature
degree decreases, thermostat can connect power automatically and thermostat
indicator start working again. This will circulate to ensure temperature is within the
temperature range you set.
E. Pull the pre-dought into container.
F. Press switch Drop to have dought from container.Dought will be fried in oil tank.
G. Press switch Flip to turn over the dought.
H. If everything work well,press switch Auto to have machine work automatically.
5.. Finally, decorating the already cooled doughnuts to make your delicious donut.
V. CLEANING & STORING
1. Do cut off the appliance's power supply and wait it cooling down before cleaning.
2. Do not use strong alkali cleaners such as lye, soda ash, or trisodium phosphate, these
will discolor or even corrode the equipment. Wipe the appliance with soft cloth
.Never with abrasive products.
3. Store it in a dry place away from corrosive substances.