Use and Care Manual

I . SPECIFICATIONS

Model/Name

LBD4 Donut machine

LBD6 Donut machine

Voltage

AC 110 V / 60 Hz

AC 220 V / 50Hz

Heating Power

2 KW

Weight

16 KG

19 KG

Donut Diameter

20~40 MM

Machine's Size

500*400*450 MM

500*550*450 MM

II. IMPORTANT SAFEGUARDS

1. Make sure that your power supply matches with the power that marked on the

product. The deviation is under 10%.

2. It is high power equipment, connect a Current safety device before use it.

3. Before obtaining access to terminals. All supply circuits must be disconnected.

4. If the supply cord is damaged or machine shows any signs of damage, it must be

replaced and fixed by the manufacturer, its service agent or similarly qualified

person in order to avoid a hazard.

5. The electronic and electric parts must not be immersed.

6. DO NOT handle roughly or drop on hard surfaces.

7. DO NOT mix with other utensils in the sink when washing.

8. DO NOT allow to rust. Always wash parts thoroughly. Dry completely and then

lubricate with mineral oil or liquid shortening before storing or reinstalling in unit.

9. DO NOT force the machine if it becomes jammed. Disassemble and remove any

obstruction to prevent damage to the plunger.

10. It is forbidden to switch on the machine without oil since this could cause a

rapid burn of the radiator and a malfunction of the machine.

11. The instruction concerning persons (including children) with reduced physical,

sensory or mental capabilities or lack of experience and knowledge is not

applicable.Children being supervised not to play with the appliance.