Instructions / Assembly
Table Of Contents
- 4 -
12. Charging prompt: when charging, the red light at the switch/0K key is
on, and when fully charged, the red light is off.
13. The working temperature of this product is - 10
℃
-70
℃
.
14. The waterproof grade of this product is IP67
15. The light source of the detection line is LED lamp, which is 8 (front
end)+1 (left side)+1 (right side)
16. The screen can only be rotated 180 degrees. Do not rotate too hard to
avoid damaging the product.
17. Product content includes: Handheld Display x1, 5m Detection Line x1,
Hook x1, Magnetic Hook x1, Aluminum Ring x1, Data Line x1, Instruction
Manual x1
PROCEDURE
1. With reference to example 1, insert the TF card into the TF card slot as
shown in the figure, and gently press until the card locks (Note: you must
insert class 10 to take pictures and record videos)
2. Long press the power on key for 2 seconds, and the image appears
after the screen loads the power on screen. At this time, the lens light is on;
Short press the lens light adjustment key to adjust the lens
3. Short press to take a picture; Long press to record, short press again to
stop recording
4. For others not mentioned, please describe the operation in combination
PRODUCT PARAMETERS
Lens diameter: 8.0mm
Lens pixel: 1 million
Angle of view: 70 degrees
Focus: front lens 3-8 cm, B lens 2-6 cm, C lens 1.5-3 cm
Display screen: 5.0 inch color display screen
Battery capacity: 5000 mA