Use and Care Manual

3
z Do not drop objects on hose.
z Do not lift and carry hydraulic equipment by the hoses or couplers, use the handle
or other means.
z Use hydraulic equipment in normal operating temperatures. Do not use
equipment in temperatures of 65 ℃ (150℉) or higher. Overheating will soften
seals and weakens hose materials, resulting in oil leaking or other equipment
failure.
2. DESCRIPTION
Air Hydraulic Pump supplies hydraulic fluid pressure to selected tools. It consists of an
in-line air and hydraulic cylinder.
SPECIFICATIONS
Oil Delivery
(cu.in / min )
Model
Pressure
Rating
(psi)
Useable
Oil
Capacity
(cu.in)
Input Air
pressure
(psi)
Input
Port
Threads
(NPT)
Output
port
Threads
(NPT)
No
load
load
Operational
Manner
Weight
Ibs
TAP-1600 7,500 98 90-145 1/4’’-18 3/8’’-18 49.5 7.6 Foot Pedal 19
3. BEFORE USE
To prevent oil leak during shipment, a metal knob is installed and tightened to ensure
the best sealing function. Loosen it counterclockwise
before use.
Note: Always secure threaded port connections with
non-hardening pipe thread compound. Tighten
securely to prevent accidental removal of
components while in use. Take care not to introduce
compound into port orifices. Familiarize yourself with
the specifications and illustrations in this operator’s
manual. Know your pump, its limitations and how it
operates before attempting to use. Refer to
Specification chart on above for details of oil port
thread size, usable oil capacity, and more.
4. OPERATION
Operation of the Unit as follow:
4.1 Connect the hose of the Air Hydraulic pump to the hydraulic coupling on the
selected tool.
4.2 Connect the air supply line to the Air Hydraulic pump. Air supply be 5-10 CFM at
100 PSI to obtain proper operating characteristics, in addition, the air line should
be equipped with an air line filter.
4.3 To Advance, hold or Retract
z Foot Pedal operate pumps: