Have product questions? Need technical support? Please fae! free to contact us: This is the original instruction, please read all manual instructions carefully before operating. TREVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received.
Naming-To reduce the risk of injury, user must read instructions manual carefully. 0 HOUSEHOLD USE ONLY INTRODUCING THE TREVOR'S DIE CUTTING MACHINE The Trevor's die cutting machine is so simple to use! It's so easy to create beautifully die cut and embossed projects... ‘We have included everything you need to get you started right away! The Trevor's machine has a stylish design that is the perfect tool to complete any craft room. Contents...
FOR MORE INTRINSIC DESIGNS: Dle cutting sandwich {when using Intricate dle designs} 3mm thin plate + Repeat as steps as above, however you may find you need to add 0.3mm transparent plastic sheet or one more layers of card stock embossing folder to act as a spacer shim you may need to paper experiment for best results. mca thn plate DOING EMBOSSING PROJECTS: + Place the 13mm white platform on a flat surface. + Cover with a thin (3mm) transparent cutting plate.
TROUBLESHOOTING: If you experience a poor cut / embossing, fry one or more of the following tips. 1. Check your layered sandwich of plates is correct. 2. After the stacked sandwich has emerged from the Trevor's machine, reverse the rotation of the handle tc cut / emboss a second time. 3. Move the die and partially cut card stock to the edge of the plate before running through the Trevor's machine again. 4.
