Use and Care Manual

3
6. Install 4 connectors under the box,using 4 pieces of M5*20
screws and 4 gaskets.
7. Install the box on the stand.using 4 pieces of M5*50 screws and M5
nuts.Box corners place on 4 connectors.
8. Install the platform in the left side of the box.And install the handle
in the right.Use 8 pieces of 5*20 screws and gaskets.
9.Put the stainless steel pan on the top of box and buckle it.
10.Complete all assembly.You can use it when power on.