Instructions / Assembly
- 15 -
a. Tap the icon on the main screen of function setting to enter
the screen of charging mode selection;
b. Click the icon to enter the plug and charge function (plug the
gun to charge, draw the gun to stop charging); At this point, the device
enters the state of plugging in the gun and charging while drawing the gun
stops charging. The RFID card charging function is turned off.
c. Tap the icon again to return to the main screen of function setting.
d. Click the icon on the charging mode selection interface to enter the
RFID card charging mode. At this time, you can use the RFID card to turn
on or off the charging at the device card swiping place; Plug and charge
function turned off, click again to return to the main screen of
function Settings.










