Instructions / Assembly

Manual Bead Breaker
1，Tools required:adjustable wrench,open end wrench,or air
wrench.DO NOT use impact wrench as it will damage the bead breaker.
2，Place bead breaker onto the rim with teeth and breaker foot
between rim&tire bead.
3，Tighten rim clamp jaw until”snug”with hand wrench.Make sure bead
breaker teech and foot are against bead.
4，Continue tightening with wrench until snug.DO NOT overtighten!!
5，Turn bead breaker nut clockswise to engage foot with bead.
6，Continue to ture clockwise until bead is broken loose from
rim.Process may be repeated in 2 to 3 locations on each side of the
wheel.
! WARM TIPS !
Please take this product sets back indoors when you are
finished work.NO RETURNS UNLESS THE TOOLS ARE
DAMAGE UPON ARRIVAL.
MADE IN CHINA