Instructions / Assembly

- 9 -
2. Installation Procedures
 With the tailgate open, place Bed Extender pivot pins into the left and right
mounting brackets. Rotate to 45 until it drops into place, then lower it onto the
open tailgate.
 Flip the Bed Extender out to contain cargo in the truck bed when the tailgate
is open. CAUTION: 200lb maximum load on the open tailgate. Always
distribute the cargo evenly and properly secure inside the bed. Do not secure
cargo to the Bed Extender or the tailgate.
 Before driving, secure Bed Extender by locking the provided strap buckles
into the truck's tailgate latches. To release, pull the tailgate handle. NOTE:
Ensure that both buckles are properly locked into the latches by pulling up on
each strap.
 Flip the Bed Extender forward and close the tailgate to keep smaller cargo
safe and organized.