Instructions / Assembly

Assembly Instruction
Recommend two person assembly
Step 5
Attach the left weight plate post(#8) to the hole on the left rear support(#10)
and secure with 1x M10 x 25MM Allen Bolt(#19) and 1 x Φ10mm
Washer(#21).Place the sleeve(#14) onto the left weight plate post(#8) and
then the spring clip(#15).Tighten the sleeve(#14) with 4# Allen wrench
clockwise or loosen the sleeve(#14) with 4#Allen wrench anti-clockwise.
Repeat the same for the right weight plate post.