Manualshelf

Instructions / Assembly

ManualsBrandsVEVOR ManualsKids ToysSquat Stand Power Rack Adjustable Power Rack with Pull up Bar, Hook and Weight Plate Storage Attachment
121122123124125126127128129130
Assembly Instruction
Recommend two person assembly
Step 3
Attach the right rear support (#11) to the right stabilizer (#13) and align the
holes with 2 x M10 x 65MM Carriage Bolts (#17),Bracket (#12) and 2 x
Φ10mm Washers (#21) and 2 x M10 Aircraft nuts(#20) .Don’t tighten the
nuts.Then attach the other end of the right rear support(#11) to the right
lower post(#2) and align the holes with 2 x M10 x 70MM Carriage Bolts
(#16),Bracket (#12),2 x Φ10mm Washers (#21) and 2 x M10 Aircraft
nuts(#20).
Tighten all the bolts and nuts when finishing assembling on Step8.