Electric Conveyor Toaster Users’ Manual
Thank you for purchasing this range of appliance of our company. Proper attention to preventative maintenance and scheduled maintenance procedures will prolong the life of the appliance. Warning: Improper installation, adjustment, alteration, service or maintenance can cause property damage, injury or death. Read the installation, operation and maintenance instructions thoroughly before installing or servicing this appliance.
This kind of conveyor toaster is developed by our company. It absorbs the advantages of similar products home and abroad. It is novel in design and reasonable in structure. It is easy to operate and maintain. It is made of stainless steel. The rotation speed of the belt can be adjusted to toast your desired bread. It is an ideal choice for hotels, super-markets, western food kitchen, fast-food chains and other food industries. 1.
2.4. Down tray installation: Insert the down tray to the hook of the down tray from the back of the appliance following the arrowhead (picture two). 2.5. Back tray installation: Insert the back tray to the hook of the back tray following the arrowhead (picture three).
3.1. Make sure the supplied voltage matches the rating voltage on the naming plate. 3.2. Make sure that the appliance is grounded safely. For convenient operation, never pile up the sundry goods near the switch. 4. Operation 4.1. When the power is on, the indicator will light, turn the knob COLOR CONTROL to right until it reached the position “3” (notice: the speed of the chain net as fast as the color became lighten.
upside down Keep it dry and dust-free. Do not expose it to direct sunlight. Avoid mechanical shocks and vibrations If it is for temporary storage, the weather- proof method should be taken 6.Cleaning and maintenance 6.1. Before cleaning and repairing the unit, cut of the power in case of electric shock. 6.2 After finishing a day's work, pull out the tray and clean it Use a piece of wet cloth dampened by detergent solution which is not corrosive to clean the unit.
HL1------Power indicator lamp ∞------Fan EHI, EH2------Electric heating elements R------Speed regulator M------Motor QS.------Switch 10.Parts breakdown illustration 11. Spare parts N O . 1 2 3 4 5 6 7 8 Description Power cord Indicator lamp. Winding resistor Switch Fan Motor Lower electric heating element Upper electric heating element Model & Specifications HET-150 HET-300 HET-450 3x1.5m ㎡ 3x1.5m ㎡ 3x1.5m ㎡ SF23080AT 220V 0.6kw 220V 0.
