1. Remove the Tail Light a. Remove two above: bi Open the tail light cover, set the tail hit aside; ¢. Disconnect the wiring harness connector d. Take-off the tail light, 2. Install the Bracket-1 a: Align the Bracket) tithe mounting position: b. Fasten the Tore Bolt in the middle hole on the Bracket 1st; £.
3. Install the Bracket-2 a. Locate the Tie:Down Plate on your truck bed: bi Theremin Tie-Dion Plate hy unscrewing the four bolts: Install the Bracken-2 with originality deadbolt tighten them: 4, Install the Storage Tool Box a.
1. Remove the Tail Light a. Remove two above: bi Open the tail light cover, set the tail hit aside; ¢. Disconnect the wiring harness connector d. Take-off the tail light, 2. Install the Bracket-1 a. Align the: Bracket tithe mounting position; b.
3. Install the Bracket-2 a. Locate the Tie:Down Plate on your truck bed: bi Theremin Tie-Dion Plate hy unscrewing the four bolts: Install the Bracken-2 with originality deadbolt tighten them: 4, Install the Storage Tool Box a.
