1. Remove the Tail Light a. Remove two above: bi Open the tail light cover, set the tail hit aside; ¢. Disconnect the wiring harness connector dl. Take off the tail light, 2. Install the Bracket-1 a: Align the Bracket) tithe mounting position: b. Fasten the Tore Bolt In the middle hole on the Bracket 1st; £. Tighten the Bracket from 110.
3. Install the Bracket-2 a. Locate the Tie:Down Plate on your truck bed: be Theremin Tie-Dion Plate hy unscrewing the four bolts: Install the Bracken-2 with originality bolted tighten them: 4, Install the Storage Tool Box a.
5. Test-and Adjustment a. Pull the yellow latch to make tie the storage box rotates Sensibly and Inches smoothly; b, Please-make some small adjustment if it won alto fray, Just loosen theorist belts on the lately ¢. installation completed: ds Lock ths padlock inch the Role if denseness.
1. Remove the Tail Light a. Remove two above: bi Open the tail light cover, set the tail hit aside; ©. Disconnect the wiring harness connector dl. Take-off the tail light, 2. Install the Bracket-1 a. Align the: Bracket tithe mounting position; b.
3. Install the Bracket-2 a. Locate the Tie:Down Plate:on your truck bed: bi Theremin Tie-Dion Plate hy unscrewing the four bolts: Install the Bracken-2 with originality deadbolt tighten them: 4, Install the Storage Tool Box a.
5. Test-and Adjustment a a. Pull the yellow fate to make store the storage box rotates Sensibly and Latches smoothly; b, Please-make some small adjustment if it won alto fray, Just loosen theorist belts on the lately ¢. installation completed: dl: Lock ths padlock inch the Role if denseness.
