EXPLOSIVE VIEW JG210 SERIES NO | DESCRIPTION NO | DESCRIPTION NO | DESCRIPTION 1 ‘Sawdust container 2 Rubber fest 3 Bottom plate 4 Action wheel 5 Protect plate 8 Limited switch set 7 Pusher 8 Adjust part 9 Main body cover 10 | Main body 11 | Driven whee! 12 | Adjust screw 13 | Blade 14 | Blade limited set 15 | Motor 16 | Work table 17 | Blade block 18 | Motor cover B1 | Magnetic switch B2 | Adjust screw B3 | Bakelite handle part Bd | Mat M5 B5 | Screw M5x40 B8 | Gross straw Mex B7 | Screw M8x30 B8 | Spring
TECHNICAL SPECIFICATIONS: Model JG210X JG210XP JE300 Voltage 110/220v 110/220v 110/220/380 V Frequency 50/80Hz.
Intended use Make sure the machine should be placed on the level ground or desk. Open the door cover, check if the blade and wheels fit well. Adjust the wheel by the top adjust screw. Attention: in order to protect the saw blade teeth. The teeth need out of the wheel about 2~3mm According the cutting thickness request, adjust the protect plate to correct position, and start. IMPORTANT: Remember use the pusher to protect your hand.
