Use and Care Manual

TEMPERAURE UNIT SETTING
Press and togther and hold for 3 seconds, the temperature
unit will switch from Fahrenheit to Celsius degree or the other way
around, Fahrenheit or Celsius degrees indicator will appear in the
temperature display window.
TEMPERATURE DISPLAY SETTING
Press or and hold for 6 seconds, the temperature display
will switch from the setting temperature to the cabinet real-time
temperature or the other way around.
• The factory preset temperature diaplay mode is the real-time temperature.
TURBO COOLING
Press and hold for 3 seconds to enter turbo cooling, this
mode will run 12 hours and then auto exit. Press again to manual exit
the turbo cooling.
SABBATH
Press and hold for 6 seconds to enter Sabbath mode,
the panel display, indicator and keytone will be shut off. Press and
hold for 3 seconds to exit the sabbath mode.
COMPRESSOR RUN INDICATOR
When the compressor is running, the RUN indicator is ON which
representing a running compressor. If the compressor stops running,
the running LED will go out as well. If the RUN indicator is flashing, the
unit is in automatic defrost.
DOOR ALARM
If the door has been left open for more than 5 minutes, the alarm will
sound along with ‘dr’ flashing. The alarm will stop by closing the door
or press any key.
REFRIGERATOR ALARM
This outdoor refrigerator has an alarm system feature that activates
when the unit detects any malfunction in the refrigerator system. If the
temperature display window displays "Lo", "EI", or "HI", and the
ALARM indicator flashing, please proceed to the Troubleshooting
section of this user manual.
- 13 -