Use and Care Manual

CONTROL PANEL
It is recommended you install the appliance in a place where the
ambient temperature is between 60- 90 degrees Fahrenheit. If the
ambient temperature is above or below recommended temperatures,
the performance of the unit may be affected. For example, placing your
unit in extreme cold or hot conditions may cause interior temperatures to
fluctuate. The range of 34 - 50 degrees Fahrenheit may not be reached.
ON/OFF
The appliance is in ‘stand by’ after power on, ‘OF’ displays in the screen,
Press to start the unit, Press again and hold for 3 seconds to turn
off and go back to ‘stand by’.
• The factory preset temperature is 38°F / 3°C.
Press or once to start the temperature setting, the current
setting temperature will be flashing, contiune press to adjust the
temperature of the appliance, and each press on the button will alter the
temperature by 1°F, hold buttons will fast scroll the numbers. the setting
will be automaticlly memorized after 10 seconds or door being closed.
LIGHT SWITCH
to switch the Interior Light ON/OFF or switch differentPress
light colours, depends on the models.
• The interior light can be turned On or Off automatically with the opening or
closing of the door.
TEMPERATURE SETTING
- 12 -