Manualshelf

Use and Care Manual

ManualsBrandsVEVOR ManualsFlooringWet Tile Saw, 15-Amps 10 in. 65Mn Corded Wet Tile Saw, 4500 RPM, Tile Cutter Wet Saw with Water Reservoir and Casters
31323334353637383940
33
1
2
2
OPERATING INSTRUCTIONS
Closing or Opening Stand
• Remove water rear and side extension trays and store them inside the water tray.
Remove any work pieces from the tool.
Note: When storing, place the rear extension tray-1 at the bottom, side extension tray on the middle
and rear extension tray-2 on the top.
• Place the sliding table in front of the frame and lock the table in place.
IMPORTANT: Ensure that the table is locked in place before closing the stand.
• Lower the wheel and secure by locking the saw head in
place using the lock pin and lock knob.
Closing Stand
• At the same time, step on release lever, grasp handles
and lift them up and away from the body.
• Push the saw until the release lever clicks and locks into
place.
Press
with foot
Press
with foot