Use and Care Manual

32
2
2
1
3
1
2
OPERATING INSTRUCTIONS
Using the Laser Guide or LED
DANGER
Laser radiation. Avoid direct eye contact with light source.
WARNING
Use of controls or adjustments or performance of procedures other than those specified herein could
result in hazardous radiation exposure.
Press on the laser or LED switch button to turn on the
laser or LED.
When the laser guides switch is turned on, it will generate
a red line.
• Press on the laser or LED switch button again to turn off
the laser or LED.
Using the Miter Guide
To adjust angles:
• Loosen the miter knob.
Rotate to the desired angle by moving the guide left or
right.
• Tighten the knob securely before turning on the saw.