Manualshelf

Use and Care Manual

ManualsBrandsVEVOR ManualsFlooringWet Tile Saw, 15-Amps 10 in. 65Mn Corded Wet Tile Saw, 4500 RPM, Tile Cutter Wet Saw with Water Reservoir and Casters
31323334353637383940
30
2
1
1
3
When remove the sliding table
• Rotating table stop-1 (V1) and table stop-2 (V2) to unlock
position. Unlock the sliding table lock knob (K) clockwise
to vertical position and remove the sliding table (I).
Filling the Reservoir Water
• Fill the water tray with clean tap water to the max fill line.
DO NOT fill past the max fill line on the tray.
Changing Reservoir Water
• Unplug the saw.
• Remove the drain plug and empty waste water into a
bucket. Do not allow the water to splash onto the ground
or around the machine.
• Rinse the machine thoroughly.
• Discard the waste water in accordance with local
regulations.
• Replace the drain plug and refill tray with clean water.
OPERATING INSTRUCTIONS
V1
V2
I
K
LockedLocked UnlockedUnlocked