Use and Care Manual

OPERATING INSTRUCTIONS

WARNING

• DO NOT allow familiarity with the tool to make you careless. Remember that a careless fraction of a

second is sufficient to inflict serious injury.

• ALWAYS wear eye protection with side shields marked to comply with ANSI Z87.1. Failure to do so

could result in objects being thrown into your eyes, resulting in possible serious injury.

• DO NOT use any attachments or accessories not recommended by the manufacturer of this tool. The

use of attachments or accessories that aren't recommended can result in serious injury.

APPLICATIONS

You may use this tool for the purpose listed below:

• Straight line cutting operations such as cross cutting, mitering, ripping, and beveling.

Note: This saw is designed to cut man-made tile, pavers, and stone tile products only.

GFCI and ON/OFF Switch

This saw is equipped with an on/off switch that has a

built-in locking feature. This feature is intended to prevent

unauthorized and possible hazardous use by children and

others.

Turning Saw ON

Press the reset button on GFCI first. Lift the switch to turn

ON.

Turning Saw OFF

Press the switch down to turn OFF.

OFF

ONOFF ON