Use and Care Manual

ASSEMBLY INSTRUCTIONS

3. Remove arbor nut (OO) and outer washer (QQ), leaving

inner washer on the arbor.

4. Place cutting wheel (F) onto arbor (with arrows on wheel

going in the counterclockwise direction).

WARNING

• ALWAYS install the inner wheel washer before placing

wheel on arbor. Failure to do so could cause an accident

since the wheel will not tighten properly. NEVER use

wheels that have openings, grooves, or teeth on this tool.

5. Replace outer washer (QQ), making sure the double “D”

flats on the washers are aligned with the flats on arbor.

Replace arbor nut (OO) on arbor.

Flats