Use and Care Manual

11
SAFETY INFORMATION
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble
the product.
Tools Required for Assembly (not included): 13 mm open wrench, adjustable wrench.
ASSEMBLY INSTRUCTIONS
UNPACKING
This product requires assembly.
• Carefully lift the saw from the carton and place on a level work surface.
WARNING
• DO NOT use this product if any loose parts on the Package Contents or Hardware Contents sections
are already assembled to your product when you unpack it. Parts on this list are not assembled to the
product by the manufacturer and require customer installation. Use of a product that may have been
improperly assembled could result in serious personal injury.
1. Inspect the tool carefully to make sure no breakage or damage occurred during shipping.
2. DO NOT discard the packing material until you have carefully inspected and operated the tool.
3. The saw is factory set for accurate cutting. After assembling it, check for accuracy.
4. If any parts are damaged or missing, please call 1-888-3KOBALT (1-888-356-2258) for assistance.
WARNING
• If any parts are damaged or missing, DO NOT operate this tool until the parts are replaced. Use of
this product with damaged or missing parts could result in serious personal injury.
• DO NOT attempt to modify this tool or create accessories not recommended for use with this tool. Any
such alteration or modification is misuse and could result in a hazardous condition leading to possible
serious personal injury.
• DO NOT connect to power supply until assembly is complete. Failure to comply could result
in accidental starting and possible serious personal injury.