Instructions / Assembly

2
SAFET
Product Overview
The VEVOR 180° TUBE BENDER is used to Bend 1/4" , 3/8" and 1/2"
tubing. For bending soft copper, aluminum, brass, thin wall steel, thin
wall stainless steel and other tubing. Makes smooth, tight-radius 180°
bends. Calibrated markings-for making accurate left-hand, right-hand
and offset bends. Adjustable hook for optimum bending radius.
Patented
Technical Specifications
Pipe outer dia: 1/4" 、 3/8" 、1/2 "
Wall thickness of pipe: ≤1.2mm
Bender angle: 0
°
— 180
°
Bender dia: 5/8"
Gross Weight: 1.3kg±3%
Carton Size: 460*105*105 mm
±
6mm
Y
Note / Remark. Caution / Warning.
Read the instruction manual.
Warning- Be sure to wear eye protectors when using this product.
Warning- Be sure to wear gloves when using this product.
WARNING! Read and understand all instructions before using this
tool. The operator must follow basic precautions to reduce the risk of
personal injury and/or damage to the equipment.
Keep this manual for safety warnings, precautions, operating or inspection
and maintenance instructions.