Cline ey Harbor Fraught Tools Co. makes every foe! to assure that ils products nest igh quality and durability standards, and warrants to the original purchaser hal (his product is free from defects in materials and workmanship for the period of 80 days from the dale of purchase. This warranty dons not apply fo damage due directly or indirectly; 10 misuse, abuse, negligence of accidents, repairs or alterations outside our facilities, criminal activity.
Table of Contents Safety .. 2 Maintenance = Specifications 7 Parts Lists and Diagrams 8 Warranty Operation... beige Marquess 0g Re This is the safety alert symbol. Iris used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. indicates a hazardous situation which, if not avoided, will result in death or serious injury. Indicates a hazardous situation which, If not avoided, could result in death or serious Injury.
THANKSGIVING Parts List Electrical safety Part Description Part Description Cable Feed 22 18" Wheel 2 Front Post 23 [Rubber leg Tip 2 {Bolt 24 {Drum Shaft Retaining Pin 4...
Service Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safely of the power tool is maintained. Drain Cleaner Safety Warnings 1. Maintain labels and nameplates on the tool, These carry important safety information, if unreadable or missing, contact Harbor Freight Tools for a replacement. | 2. Wear ANSI-approved safety impact eye goggles and heavy duty LEATHER work gloves when using the Drain Cleaner.
JONYNIINIVIN Parts Lists and Diagrams PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.
WARNING TO PREVENT ELECTRIC SHOCK AND DEATH FROM INCORRECT GROUNDING WIRE CONNECTION: Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power cord plug provided with the tool, Never remove the grounding prong from the plug. Do not use the tool if the power cord or plug is damaged. If darn aged, have it repaired by a service facility before use. If the plug will not fit the cutlet, have a proper outlet installed by a qualified electrician.
ee Maintenance and Servicing 4 h Procedures not specifically explained in this manual must be performed only by a qualified technician. WARNING TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: Turn the Rotation Switch of the tool to its “OFF” position and unplug the tool from its electrical outlet before performing any inspection, maintenance, or cleaning procedures. TO PREVENT SERIOUS INJURY FROM TOOL FAILURE: Do not use damaged equipment.
SLT Bet CU &H Functions Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Rotation Switch Working Through a Blockage 1. if cutting tool becomes lodged in a blockage and Drain Cleaner is still operating, cable will start to wind up or twist, If so, release pressure from Foot Switch and Drain Cleaner motor will stop. WARNING! Do not let cable build up outside drain. 2.
Power Feed Operation WARNING TO PREVENT SERIOUS INJURY FROM TWISTED OR BROKEN CABLES, CABLE ENDS WHIPPING AROUND, MACHINE TIPPING, CHEMICAL BURNS, INFECTIONS, ELECTRIC SHOCK AND OTHER CAUSES: Follow operating instructions for your model explicitly. Since drains likely contain hazardous chemicals or bacteria, wear appropriate protective equipment, such as: ¢ ANSI-approved splash-resistant safely goggles and respirator under face shield.
Assembly Note: Ne assembly needed for Model 68285. MA WARNING TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: Turn the Rotation Switch of the tool to its “OFF” position and unplug the tool from its electrical outlet before assembling or making any adjustments fo the tool. Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual.
Manual Feed Operation WARNING TO PREVENT SERIOUS INJURY FROM TWISTED OR BROKEN CABLES, CABLE ENDS WHIPPING AROUND, MACHINE TIPPING, CHEMICAL BURNS, INFECTIONS, ELECTRIC SHOCK AND OTHER CAUSES: Follow operating instructions for your model explicitly. Since drains likely contain hazardous chemicals or bacteria, wear appropriate protective equipment, such as: + ANSI-approvetd splash-resistant safety goggles and respirator under face shield.
(oii 2 Else] 7. Rotate the drum and make sure that it turns freely without binding. 8. Check that al warning labels are present, firmly attached and readable. 9. Make sure Belt Guard is securely fastened to the Drain Cleaner. 10. Check the cable for any wear and damage. If any section of the cable is worn or flattened, replace cable before use. 11. Verify cable does not have multiple or excessive kinks {greater than 15°). Kinks weaken the cable and can cause cable failure.
