Pipe Inspection System —————————————————— Instruction Manual
Attentions 1.Please read the manual carefully before using it. 2.Handle it carefully during operation, avoid throwing down or pressing it heavily. 3.If the users disassemble or deliberately damage the machine, it will beyond the warranty. 4.Please keep distance from the system when charging. 5.After being used, turn off the display and pull out all the connection joints. 6.If this manual content does not accord with your machine due to the version upgrades, please refer to us. Description 1.
Product Specification Item: Charger: Battery: Investigation depth: Material: Camera light source: Camera material: Menu languages Camera picture: parameter AC100-240V Lithium battery 10M( selectable line length) Fiber tube with high intensity With high while light Stainless steel Multi-language Color Instruction for Product 1 Camera (A) 1、metal contact chip 4、camera lens 2、spring 3、highlight white LED Product Specification Item: parameter Camera diameter: 23MM With the tube diameter: >25MM Camera ligh
Camera (B) 1metal contact chip 2spring 3highlight white LED 4camera lens Product Specification Item: parameter Camera diameter: 17MM With the tube diameter: >18MM Camera light source: 6 LED with high while light(adjustable) Camera working voltage: 5V Lights working voltage: 12V Water proof: IP68 Camera material: stainless steel Camera size: 100MM* 17MM Camera protective cover parts material: metal Camera protective cover parts size: 20MM* 25MM Camera(C) 1、highlight white LED 2、camera lens Product S
2.
3 Coil 4.
System Installation 1. Vital: turn off the power switch and connect the video camera and the monitor. 2. Connect camera to coil with monitor . 3. Turn on the power switch in the power box, and the switchboard starts. 4. Install the video camera with the protective cover slightly and put it into the pipe, and then rotate coil to proper depth. 5. Adjust LED light degree adjuster to proper light degree. 6.
Product components and accessories Charging When the battery power is low, it needs charging, and the method is as below: 1、Take out the battery and charger from the box. 2、Connect the charger to the battery. 3、Connect the charger to the alternating current of 100-240v. The red indicator means charging. 4、The green indicator means finishing charging. Notes: to make sure the battery using age longer, please recharge it timely; otherwise, it will be unable to be recharged.
