Use and Care Manual

- 7 -
CLEANING
Wipe clean as needed. Use mild upholstery cleaner (not caustic) to clean the chest
deck pad as needed.
LUBRICATION
DO NOT lubricate casters. This can damage the mechanism.
STORAGE
1. Remove the leg lock pins from each leg. Hold the ladder when removing the
second pin, as the base frame will fall to the floor. Store the pins in the creeper's
pouch.
2. Push the ladder's angle support arms back towards the ladder.
7. Lift each leg up until it rests next to the ladder assembly.
8. Store the creeper vertically. Make sure the rear casters are locked once it is in
place.
REMOVAL FROM STORAGE
1. Lower each leg.
2. Pull the ladder's angle support arms forward to settle in a height adjustment
notch.
3. Remove the leg lock pins from the pouch.
4. Lift the base frame and push the leg down until it the bolt holes align. Push the
leg lock pin through and turn the end down. Repeat with the other leg.
5. Unlock the rear casters and it is ready for use.
Sanven Technology Ltd.
Address: Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730
Made in China