Use and Care Manual

- 6 -
adjustment notches. Insert a height
adjustment plate bolt(R) through the bolt
hole at each end of the plate. Secure each
bolt with a lock nut 2(W). Repeat on the
other side.
6. Attach the chest deck frame (C) to the top
of the ladder assembly (B) using three chest
frame bolts (P) and lock nut3 (X) on each side. Attach the chest deck pad (D) using
two Phillips screws (S) from underneath.
7. Put the pouch (H) and align the screw
holes. Insert two chest frame bolts (P) and
lock nut3 (X) through the screw holes. Line
up the protruding screws with the holes in
the deck frame's front. Secure the pouch to
the deck frame with the screws.
8. Re-check and tighten all bolts and screws
as necessary.
CARE & MAINTENANCE
1. Maintain the tool with care. A tool in good condition is efficient, easier to control
and will have fewer problems.
2. Inspect the tool components periodically. Repair or replace damaged or worn
components. Only use identical replacement parts when servicing.
3. Maintain the tool's labels and name plates. These carry important information.If
unreadable or missing, contact VEVOR for replacements.
WARNING!
Only qualified service personnel should repair the tool. An improperly repaired tool
may present a hazard to the user and/or others.