Manualshelf

Use and Care Manual

ManualsBrandsVEVOR ManualsAutomotiveAutomotive Topside Creeper Engine Creeper 42.5 in. to 64.8 in., 400 lbs. Capacity 4 Swivel Caster Wheels, Foldable
123456789
- 4 -
6. DO NOT stand or sit on the chest pad deck.
7. DO NOT use the foldable top automotive creeper to work over a running engine.
8. DO NOT get the foldable top automotive creeper wet or use it in damp locations
or areas where there is condensation.
9. Use the creeper on a smooth, level surface capable of withstanding the total
load.
10. ALWAYS lock the casters before using the foldable top automotive creeper .
PACKING LIST
Item
Item
QTY
Item
Item
QTY
A
Base Frame
1
〇
Cross Support Bolts
2
B
Ladder Assembly
1
P
Chest Frame Bolts
6
C
Chest Deck
Frame
1
Q
Height Adjustment Plate
2
D
Chest Deck Pad
1
R
Height Adjustment Plate
Bolts
4
E
Right Leg
1
S
Phillips Screws
2
F
Left Leg
1
T
Washers
2
G
Leg Cross
Support
1
U
Flange Nut
4
H
Pouch
1
V
Lock Nut 1
8
J
Front Casters
2
W
Lock Nut 2
8
K
Rear Casters
2
X
Lock Nut 3
6
N
Frame Bolts
8
INSTALLATION
Letter references in parenthesis (A) refer to the contents.
1. Assemble the right and left legs (E & F) to the base frame (A). Insert the end of
each leg into the base frame's openings and align the bolt holes. The height
adjustment notches (Fig.1 1-1) will be on the inside and the legs must angle
outwards. Secure each leg with a frame bolt (N) and lock nut1 (V). Insert the two
leg bolt (N) and lock nut1 (V) then push the ends down to secure the legs.