Use and Care Manual

image).
2．Make sure parts that are not
heat-resistant (such as plastic
buttons) do not touch the heating
board.
3．Print with high pressure.
6
Chemical Fiber
Fabric
150-160°C
20s
1. Use heat transfer paper. Print the
image in reverse format (mirror
image).
2. Make sure parts that are not
heat-resistant (such as plastic
buttons) do not touch the heating
board.
3. Print with medium pressure.
300-320°F
7
Pillows and
White
Non-cotton
Clothing
190°C
50s
1. Use heat transfer paper. Print the
image in reverse format (mirror
image).
2. Make sure parts that are not
heat-resistant (such as plastic
buttons) do not touch the heating
board.
3. Print with high pressure.
340°F
Troubleshooting
Problem
Cause(s)
Solution(s)
1
Damaged images
Time too long or temperature
too high
Adjust time or temperature
2
Failure to heat up despite
normal display on the screen
The heating plate or the relay is
broken
Check the heating plate or
the relay
3
Faded images that lack color
Insufficient temperature and/or
time
Adjust the temperature
and/or increase the heating
time
4
Blurry images with darkened
colors
Time too long and temperature
too high
Adjust the temperature and
the heating time
5
No action after the power is
turned on
Poor connection between the
plug and the socket or fuse is
blown
Check the plug and the fuse
6
The actual temperature passes
the set temperature
The relay is broken
Replace The relay