Use and Care Manual

Temperature and Time Setting for Common Products
No
.
Product Name
Recommende
d
Temperature
Recommende
d Time
Notes
1
Cup/Mug
180-200°C
30s
1. Use heat transfer paper. Print the
image in reverse format (mirror
image).
2. Apply medium pressure. Make
sure the cup/mug is tightly
wrapped by the transfer paper.
Adjust the position.
330-380°F
2
Plate
180-200°C
30s
1. Use heat transfer paper. Print the
image in reverse format (mirror
image).
2. Try to place the plate in a level
position.
3. Do not apply too much pressure.
Apply the amount of pressure
enough to secure the plate.
330-380°F
3
Cap/Hat
180-190°C
40s
1. Use heat transfer paper. Print the
image in reverse format (mirror
image).
2. Try to place the cap/hat in a level
position.
3. Use medium pressure.
330-350°F
4
Cotton Clothing
160-180°C
30s
1. Use AW light heat transfer paper
(with red grids on the back). Print
the image in reverse format (mirror
image).
2. Make sure parts that are not
heat-resistant (such as plastic
buttons) do not touch the heating
board.
3. Print with high pressure.
4. Peel off the transfer paper
immediately after printing (or
otherwise it will stick to the cloth
after cooling and damage the
image).
5. This is suitable for light cotton
clothing.
320-360°F
5
Linen Fabric
160-180°C
30s
1．Use heat transfer paper. Print the
image in reverse format (mirror
320-360°F